GUARD-X
 GUARD-X
provides secure, alarmed code-compliant protection
for secondary exits. GUARD-X exit alarm lock readily
identifies the door on which it is mounted as an
emergency exit and secures the opening against unauthorized
use. It is ideal for deterring theft in restaurants
and retail establishments such as: discount stores,
grocery stores, drug stores, clothing stores and
sporting goods stores.
Heavy
Duty Design
The new Series 2670 Exit Alarm Lock provides secure
protection through a large stainless steel deadbolt,
which is 2" x 1/2" (51mm x 13mm) and has over
a 3/4" (19mm) throw. The engagement area into
the strike is over 1 1/4" (32mm) square inches.
The cast aluminum latch case protects the internal
mechanism and resists tampering or vandalism from
inside the door. This unit has been tested to
withstand up to 1600 pounds of static load force
against the door.
Security
GUARD-X does not allow relatching or resetting
the alarm after an unauthorized exit, other than
by an authorized person with a key. A 100-decibel
alarm provides a clear, attention getting warning
for an unauthorized exit or attempted exit. The
armed indicator light informs the owner that the
alarm is armed, and an audible low-battery alert
signals the owner to replace the battery when
necessary.
Compliance
GUARD-X complies with the NFPA 101® Life Safety
Code "the actuating portion of which extends across
at least one half of the door leaf". It is UL
listed for Panic Exit Hardware (UL305) including
"the ends of the crossbar or push pad shall curve,
guard, or otherwise designed to prevent catching
on the clothing of persons during exit" for use
on Emergency Exit applications, and tested in
accordance to ANSI A156.3 Grade 1 Panic Hardware
(250,000 cycles).
Installation takes just
a few minutes with an easy-to-use adhesive back
template. The product's nonhanded design means
the installer can mount it for either hand by
just removing and reversing the "Emergency Exit
-Alarm Will Sound" sign built into the device.
The standard warning sign is in English with Braille;
French and Spanish are available.
Operation and Outside
Trim
GUARD-X is armed and disarmed by a key using a
standard rim cylinder. For owner convenience,
Guard-X can be operated from the building's exterior
by a second standard rim cylinder, so an authorized
user can easily arm and disarm it to enter or
exit the building when required. When using exterior
operation a pull trim is recommended, use 210DT
or 230DT. Rim cylinders are not furnished and
must be ordered separate.
A standard 9-volt battery
powers the alarm. An exterior 9-volt power supply
is available, Model PT-790, a 120VAC plug-in.
When using the external power supply, the 9-volt
battery functions as a battery backup during a
power failure.
Dimensions
|
| Touchbar
height to finished floor |
40"
(1016mm) at center |
| Door
width range |
36"
(914mm) to 48" (1219mm) |
Touchbar projection-
Neutral
Depressed |
4 1/8" (103mm)
2 3/4" (70mm) |
| Latch
case housing |
7"
(179mm) x 4 1/16" (103mm)
x 4 1/8" (105mm) |
| Device length |
32 1/2" (826mm) |
|
Finishes
-US28 (Aluminum), 313AN (Duranodic Brown), 315AN
(Black)
How To Order
- Model number 2670 (includes strike, screw
pack and battery)
- Finish - US28, 313AN or 315AN
- French or Spanish sign, when required.
English with Braille is standard.
Accessories
- Sex nuts and bolts (6 #325) -when required
- PT790 9-volt External Power Supply -when
required
- 210DT x 050140 or 230DT x 050140 -when required
- 3216 Rim Cylinder, when required
 The
Guard-X Exit Alarm Lock Catalog
(File size: 2,259KB) is
available for download in Portable Document
Format (*.pdf). You will need Adobe's Acrobat
Reader software to read this catalog. |
The
Guard-X Exit Alarm Lock Parts Manual
(File size: 315KB) is
available for download in Portable Document
Format (*.pdf). You will need Adobe's Acrobat
Reader software to read this catalog. |
Click on the icon above to
download a FREE copy of Adobe's Acrobat Reader
|
